[vc_row][vc_column][vc_column_text][rev_slider alias=”home”][/vc_column_text][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”8″ img_size=”full” alignment=”center”][vc_column_text]
WEAR RESISTANT COATINGS
PROTECT AGAINST ABRASION, EROSION, CORROSION, FRETTING/GALLING, CAVITATION, BRINELLING.
[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/4″][vc_single_image image=”12″ img_size=”full” alignment=”center”][vc_column_text]
REPAIR COATINGS
NO NEED TO SCRAP AN EXPENSIVE PART. REPAIR OR BUILD UP TO A SPECIFIED SIZE. EXTEND PART LIFE.
[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/4″][vc_single_image image=”15″ img_size=”full” alignment=”center”][vc_column_text]
RELEASE COATINGS
FEATURING DURA-SLIK™ FLUOROPOLYMER COMBINED WITH THERMAL SPRAYED COATING PROVIDES WEAR RESISTANCE ALONG WITH RELEASE PROPERTIES.
[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/4″][vc_single_image image=”18″ img_size=”full” alignment=”center”][vc_column_text]
THERMAL BARRIER PROTECTION COATINGS
RESISTS TEMPERATURES UP TO 3000° F. ALLOWS THE USE OF LESS EXPENSIVE SUBSTRATE.
[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Buildup of thermal spray coating is really a chaotic approach, due to the fact molten particles spread out and deform (splat) as they strike the substrate, initially keying onto asperities, then interlocking with one another. Voids can happen in the event the increasing deposit traps air. Particles overheated within the spray jet can come to be oxidized. Unmolded particles may perhaps merely be embedded inside the accumulating deposit.
Several defects identified in spray coating are controllable via suitable gear and feedstock choice, but by far the greatest influence on coating structure would be the actual processing step. Properties of a sprayed coating stemming in the lamellar shape of your splats and residual porosity may be overcome by post-deposition remedies. Porosity can at times be an advantage, as inside the circumstances for oil retention on bearing surfaces, for chemically active structures including batteries, for bone attachment in orthopedic implants, and so on. Speedy particle cooling prices plus the lamellar splat shapes are two attributes that distinguish thermal spray coating from other coatings. Brittleness, hardness, anisotropic properties, and residual stresses will be the outcome of really swiftly cooled and flattened particles. Appropriately applied thermal spray coatings have numerous applications of use and supply a number of benefits.
Low Processing Fees. Fast deposition prices around the order of 1 to 45 kg/h (two to one hundred lb/h) or additional might be accomplished. Commonly, two to 7 kg/h (five to 15 lb/h) is regular practice. Speedy spray prices and higher deposit efficiencies lead to comparatively low processing fees.
A wide variety of supplies might be deposited as coatings, which includes metals, metal alloys, oxide and non-oxide ceramics, plastics, cermets, and composite structures comprised of metals, ceramics, and plastics, is often applied making use of thermal spray. Competitive coating processes don’t afford this versatility.
Thermal spraying is really a revolutionary technology that satisfies the needs demanded by a variety of surface processing applications, like anti-erosion, corrosion and chemical resistance, insulation, and other folks. Accordingly, it is actually employed in a wide variety of industrial fields.
By utilizing ceramic, cermet (a ceramic-metal composite) or other components in thermal spraying, it’s achievable to significantly boost the resistance to put on. Disc cutters utilized in tunnel excavation, marine exhaust valves, sliding components employed in building gear, dry screws, industrial rolls, and so on.
It truly is achievable to supply electrical insulating properties to conductive substrates by applying an insulating coating. It’s key applications are Insulating substrates for cars, insulating coatings for extremely functional, temperature handle devices, semiconductor manufacturing gear components, industrial rolls, and so on. By utilizing ceramic, cermet (a ceramic-metal composite) or other supplies in thermal spraying, it truly is achievable to make an anti-erosion coating with higher grip strength. It is also applied in drag rolls/nipping rolls for industrial printing machines, clasps, clasp backing, paper feed rolls for workplace automation gear, and so on.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]
Services
Manufacturing Engineering
Design Enhancement
Production Salvage / Deviation Corrections
Reclamation
Machine Component Repair/Rebuild
Maintenance Engineering
R&D Facilities
Industrial Consultants
Engineering Support
Field Coating Services[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]
Projects
Madison Plasma Dynamo Experiment
Bearing Shaft Repair Service
Thick Coating Project[/vc_column_text][vc_btn title=”RFQ’s – Click here!” color=”danger” i_icon_fontawesome=”fa fa-star” link=”url:http%3A%2F%2Fmetallicbonds.com%2Fwp%2Frequest-for-quote%2F||” add_icon=”true”][vc_row_inner][vc_column_inner][vc_btn title=”Contact Us” color=”danger” i_icon_fontawesome=”fa fa-star” link=”url:https%3A%2F%2Fmetallicbonds.com%2Fcontact%2F||” add_icon=”true”][/vc_column_inner][/vc_row_inner][/vc_column][/vc_row]