[vc_row][vc_column][vc_column_text][rev_slider alias=”home”][/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/4″][vc_single_image image=”8″ img_size=”full” alignment=”center”][vc_column_text]

WEAR RESISTANT COATINGS

PROTECT AGAINST ABRASION, EROSION, CORROSION, FRETTING/GALLING, CAVITATION, BRINELLING.

[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_single_image image=”12″ img_size=”full” alignment=”center”][vc_column_text]

REPAIR COATINGS

NO NEED TO SCRAP AN EXPENSIVE PART. REPAIR OR BUILD UP TO A SPECIFIED SIZE. EXTEND PART LIFE.

[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_single_image image=”15″ img_size=”full” alignment=”center”][vc_column_text]

RELEASE COATINGS

FEATURING DURA-SLIK™ FLUOROPOLYMER COMBINED WITH THERMAL SPRAYED COATING PROVIDES WEAR RESISTANCE ALONG WITH RELEASE PROPERTIES.

[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_single_image image=”18″ img_size=”full” alignment=”center”][vc_column_text]

THERMAL BARRIER PROTECTION COATINGS

RESISTS TEMPERATURES UP TO 3000° F. ALLOWS THE USE OF LESS EXPENSIVE SUBSTRATE.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]Although metallic element inorganic compound remains the foremost oft used material for top performance piston-cylinders, new materials are tested. Specially, high purity ceramic has been used because the piston material in commercially out there piston gauges. The density of ceramic (about 1/5 that of metallic element carbide) permits the mass of a given piston size to be reduced, lowering the minimum mass load and so very cheap in operation pressure. Ofnce exploitation ceramic pistons or cylinders, measures to avoid the build-up of static charges have to be compelled to be taken. These embody grounding the piston-cylinder through the piston rotation system and also the application, once potential, of bronze coatings to non-working surfaces.

The Discovery of Tungsten Carbide in Business Uses

Tungsten carbide inorganic compound (WC) is standard because the ingredient of cemented carbides supported WC-Co attributable to its exceptional hardness, glorious wear resistance, a high modulus of snap and retention of its temperature hardness at elevated temperatures. thanks to the distinctive combination of strength and toughness, cemented carbides square measure universally applied to cutting, mining and forming tools, also as for superior wear resistant components. Suzuki and company recognized that the most disadvantage of cemented carbides is low corrosion resistance in corrosive environments. The low corrosion resistance originates from the Co binder, and so a discount of the Co content or substitution of Co by metal improves the corrosion resistance. Another technique to boost the corrosion resistance of cemented carbides is to powerfully scale back the number of binder or take away it entirely.

Tungsten inorganic compound is commonly utilized in armor-piercing ammunition, particularly wherever depleted atomic number 92 isn’t out there or is politically unacceptable. However, it’s conjointly common to use powder science metallic element alloys (in that bronze metallic element powder has been cemented with a bronze binder). W2C projectiles were initial employed by German Luftwaffe tank-hunter squadrons in war II. Thanks to the restricted German reserves of metallic element, W2C material was reserved for creating machine tools and tiny numbers of projectiles. It’s a good intruder thanks to its combination of nice hardness and really high density.

How Tungsten Carbide is Mechanized to Make New Tools?

Tungsten inorganic compound in its monolithic work kind, or far more typically in metallic element inorganic compound atomic number 27 composite (in that fine ceramic metallic element inorganic compound particles square measure embedded in bronze atomic number 27 binder forming a metal matrix composite or MMC) may be of the sabot sort. SLAP, or sabered light-weight armor intruder wherever a plastic sabot discards at the barrel muzzle is one in every of the first forms of sabered tiny arms ammunition. Non-discarding jackets, notwithstanding the jacket material, don’t seem to be perceived as sabots however bullets. each of the styles square measure, however, common in selected light-weight armor-piercing tiny arms ammunition.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]

Services

Manufacturing Engineering
Design Enhancement
Production Salvage / Deviation Corrections
Reclamation
Machine Component Repair/Rebuild
Maintenance Engineering
R&D Facilities
Industrial Consultants
Engineering Support
Field Coating Services[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]

Projects

Madison Plasma Dynamo Experiment
Bearing Shaft Repair Service
Thick Coating Project[/vc_column_text][vc_btn title=”RFQ’s – Click here!” color=”danger” i_icon_fontawesome=”fa fa-star” css_animation=”appear” link=”url:http%3A%2F%2Fmetallicbonds.com%2Fwp%2Frequest-for-quote%2F||” add_icon=”true”][vc_row_inner][vc_column_inner][vc_btn title=”Contact Us” color=”danger” i_icon_fontawesome=”fa fa-phone” css_animation=”appear” link=”url:https%3A%2F%2Fmetallicbonds.com%2Fcontact%2F||” add_icon=”true”][/vc_column_inner][/vc_row_inner][/vc_column][/vc_row]