[vc_row][vc_column][vc_column_text][rev_slider alias=”home”][/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/4″][vc_single_image image=”8″ img_size=”full” alignment=”center”][vc_column_text]

WEAR RESISTANT COATINGS

PROTECT AGAINST ABRASION, EROSION, CORROSION, FRETTING/GALLING, CAVITATION, BRINELLING.

[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_single_image image=”12″ img_size=”full” alignment=”center”][vc_column_text]

REPAIR COATINGS

NO NEED TO SCRAP AN EXPENSIVE PART. REPAIR OR BUILD UP TO A SPECIFIED SIZE. EXTEND PART LIFE.

[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_single_image image=”15″ img_size=”full” alignment=”center”][vc_column_text]

RELEASE COATINGS

FEATURING DURA-SLIK™ FLUOROPOLYMER COMBINED WITH THERMAL SPRAYED COATING PROVIDES WEAR RESISTANCE ALONG WITH RELEASE PROPERTIES.

[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_single_image image=”18″ img_size=”full” alignment=”center”][vc_column_text]

THERMAL BARRIER PROTECTION COATINGS

RESISTS TEMPERATURES UP TO 3000° F. ALLOWS THE USE OF LESS EXPENSIVE SUBSTRATE.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]The motor vehicle detailing business advanced considerably well over the years, and a new method being adopted within the field is the Nano-Coating to supply the most effective protection for the exteriors and interiors of different automotives. Ceramic coating for cars square measure serving to vehicles maintain their saleroom shine!

A ceramic paint coating is more than just any standard paint job for shielding car surfaces. This new coating is being amalgamated to the surface and isn’t dislodged by any vibrations or external force. Whereas ancient vehicle coatings, like wax, wear off over time once exposed to the weather, acidic parts of the atmosphere and bird fecal matter, nano-coatings last for years.

A nano ceramic coating primarily provides a protecting surface to the body of the automotive which blocks all foreign matters and stops them from inflicting harm to the car. Any day, a car should be able to endure a wide range of attacks to its body such as scratches, mud, dirt and alternative contaminants that are a part of the road. The nano-coating will make sure that the automotive’s initial coating is sheathed under a protecting layer which will face up to an excellent deal of harm while not showing any ill-effects on the body of the automotive.

Getting an automotive waxed was the older equivalent of obtaining a special coating for your automotive to shield its surface. the matter, of course, is that the wax sealer provides less protection, and eventually wears off, which implies a contemporary coat must be reapplied many times a year. On the opposite hand, one coating of either Ceramic professional or Opti-Coat Pro+ ensures that you just ne’er want another wax job – ever!

The additional cavitied a surface, the better it’s for dirt to search out small pockets to sink into. Nano-coating works at molecular levels to be able to confirm that the coating is extraordinarily swish and even. This only means that even after the dirt touches the coating, it finds no place to stay to, and easily rolls off the surface. As a result of this, most of these contaminants which they get into contact with on the road are unable to stay to the surface of the automotive and can fall away, going the surface in its initial pristine state.

It may appear initially look that having a coating put in is cost-prohibitive however take another look. Since wax lasts just one to three months, it must be reapplied a minimum of quarterly. You’ll pay regarding $200 fourfold a year for a decent wash and wax. That’s $800 annually. Over five years you’d pay $4,000 for quarterly waxing. Since knowledgeable ceramic coating is actually permanent if maintained properly, it might need one application over the typical period of car possession.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]

Services

Manufacturing Engineering
Design Enhancement
Production Salvage / Deviation Corrections
Reclamation
Machine Component Repair/Rebuild
Maintenance Engineering
R&D Facilities
Industrial Consultants
Engineering Support
Field Coating Services[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]

Projects

Madison Plasma Dynamo Experiment
Bearing Shaft Repair Service
Thick Coating Project[/vc_column_text][vc_btn title=”RFQ’s – Click here!” color=”danger” i_icon_fontawesome=”fa fa-star” css_animation=”appear” link=”url:http%3A%2F%2Fmetallicbonds.com%2Fwp%2Frequest-for-quote%2F||” add_icon=”true”][vc_row_inner][vc_column_inner][vc_btn title=”Contact Us” color=”danger” i_icon_fontawesome=”fa fa-phone” css_animation=”appear” link=”url:https%3A%2F%2Fmetallicbonds.com%2Fcontact%2F||” add_icon=”true”][/vc_column_inner][/vc_row_inner][/vc_column][/vc_row]